This gallery contains 3 photos.
The trim and siding have been partially completed. The photo below gives a good perspective on the layup of the siding. The Pro Clima Mento 1000 weather resistive barrier (WRB) is the black fabric-like material against the SIPS panels. Every seam … Continue reading
This gallery contains 4 photos.
After several days of running two 70pt / day dehumidifiers the indoor humidity reached a more tolerable 35%, however the fiberglass insulation remained soaked. I decided that the potential for trapping moisture in the walls where it would cause mold simply wasn’t … Continue reading
There have been a couple of hiccups along the way; however, today’s problem is the biggest yet. Prior to starting the project I extensively researched how to build a tight-home, in-fact, how to build a Passive House. To my surprise, … Continue reading
This gallery contains 4 photos.
One of the areas the blower door and infrared camera test highlighted as a deficiency was around the windows. In-fact, the windows looked better insulated than the gap between the window frame and opening! So, I set out to remedy … Continue reading
This gallery contains 4 photos.
After the builder had left on Wednesday Structure Metrics stopped by to perform the blower door test and infrared scan of the house. The blower door (shown in the picture below) is used to determine the Air Changes per Hour … Continue reading
This gallery contains 6 photos.
The end is insight! The crew has spent the last several days installing drywall. One of the side effects of installing drywall is that mud puts a lot of moisture into the house. As a result of how tight the … Continue reading
This gallery contains 6 photos.
The builder managed to dry-in the house just in-time for the first snow! Over the last couple weeks, the builder foamed all the joints in the SIPS, taped them, laid-down the Solitex Mento 1000 weather resistive barrier (WRB), put furring … Continue reading
This gallery contains 9 photos.
The SIPS have gone together incredible quickly. In two weeks time, the walls have been erected, loft framed, beams set, and roof erected. Of course, because the house is constructed of SIPS, this also means at this point it is … Continue reading
The SIPS arrived last Wednesday. By the time I arrived on-site they were piled all over the place. As you can imagine, the panels to build an entire house take up quite a bit of room! As you may recall … Continue reading
This gallery contains 2 photos.
Over the past couple of weeks I have been working with Mark Blake to feed all of the house specs into the RESNET modeling software. The model spit out a fantastic HERS score of 44 and says that it will … Continue reading